How To Assemble A Computer
How to assemble a
computer
Materials : Motherboard Cd/Dvd
Room Mouse
Prosesor Sound
Card
RAM
(Random Access Memory) VGA
Card
Hard
Disk Case
Monitor Power
supply
Keyboard Computer
Van
I/O
Card Screwdriver
Steps :
1. Open
computer case and make it lying so make you eay to put the
components.Open holes in the rear of the cassis port so that the other
components can be plugged into the motherboards
2. Plug Power Suplly in to an available seat in
the casing
3. Install the motherboard. Supporting
motherboard first place, then attach the motherboard and tighten the screws.
Subsequently connect the Power Supply to the motherboard.
4. Replace the processor. Open the
processor socket on the motherboard hook, then attach the processor into the
slot carefully. Replace the hook and do not have to push the processor.
5. Replace the computer fan. Its position
near the processor.
6. Insert the memory. Make sure the
position is not reversed with respect to the location of the holes in memory.
Press on both ends to lock.
7. Attach the other cards,such us VGA cardSoun
Cards.Make sure the outset looksso hard when plugging cables in to the these
port.Tighten each port with a screw so as not to waver
8. Replace the hard drive and CD / DVD
drive in place. Connect both IDE data cable and power supply cable. Tighten the
screws so as not to shake when the computer is removable
9. Close the computer case back.Tighten the screw
10. Finally,connect the cables to the
monitor,keyboard,mouse,and of course to the electrical installation
Comments
Post a Comment